Standard Design of Patrol Boats to Facilitate Maritime Surveillance Based on Analytical Hierarchy Process and Regression Linear

Abstract

The problem is that many patrol boats have a variety of different equipment and spare parts, even though they are also sister ships, so a standardized design for patrol boats is needed to facilitate operation and easy maintenance. The design of a patrol boat should prioritize safety, effectiveness, and efficiency in the intended operational environment, while also taking into account budgetary and other constraints. The focus is on environmental and patrol boat operations such as the monitoring of marine pollution, the monitoring of illegal fishing, and the monitoring of maritime traffic as part of the maritime and coastguard operations. Based on the Analytical Hierarchy Process method, the percentage result is 28.1 percent of the proposed categories. The results of categories like speed, SFOC, displacement is the basis for selection. Linear regression method to get the new principal dimension for patrol boat. A new principal dimension for a standard patrol boat design is obtained by considering the deadweight, which is determined by examining the correlation between DWT-LPP, DWT- B, DWT-H, and DWT-T. The following is shown with the results of the new principal dimensions as follows: Lpp 36.50 m; B 7.80 m, H 4.25 m and T 1.90 m. Patrol boat design standards can be implemented in a variety of drawings, including line plan drawings, general arrangement drawings, construction drawings, capacity tank, and analysis result of patrol boat maneuver patterns. In this design of the operating conditions, the patrol boat is capable of operating until sea state number four conditions.